Ribbon Flames and Special Shapes: Briefing a Custom Ethanol Fireplace Manufacturer

A ribbon ethanol fireplace is not simply a long, narrow fire. It is a design decision that changes how a room is planned, how a wall is built, and how the flame is operated day to day. For architects, interior designers, and homeowners considering a custom commission, the most productive conversations with a manufacturer begin long before a final drawing is approved. They begin with clear questions about geometry, controls, and installation. Whether the project calls for a linear ribbon, a ceiling-mounted feature, or an unusual silhouette, the same principle applies: describe the space and the desired experience first, then let the manufacturer translate that into a workable custom fireplace. Suppliers such as Art Fireplace specialise in custom Ethanol Fireplaces, automatic burners, and related fire features, but a good brief still needs to be precise.

Begin With the Room and the Ribbon Run

Before discussing flame length or shape, gather the room facts. Share floor plans, elevations, ceiling heights, adjacent materials, and photographs from the main viewing positions. A ribbon fireplace is often seen from several angles, so mark the furniture layout and traffic paths. If the fireplace will divide two spaces, say so. If it will sit beneath a television, inside a joinery unit, or along a wall with windows, explain those conditions. The manufacturer needs to understand the visual line the ribbon must hold and whether the installation is indoor, outdoor, or in a hospitality setting.

Ribbon lengths matter, too. Art Fireplace’s range includes 40cm to 300cm ribbon ethanol fires, which means the brief should state the desired run rather than “as long as possible.” Ask whether the chosen length can be achieved as a single visual ribbon or whether the design requires breaks, terminations, or special end details. Also discuss the fuel tank and burner placement early. Even a slender ribbon needs a practical service strategy. If the fireplace is automatic, the manufacturer may need space for components and access for maintenance. These are not details to leave until the final shop drawing.

Describe Special Shapes in Plain Language

Special shapes can be exciting, but they are easiest to engineer and fabricate when described in plain language. Instead of saying “a curved ribbon,” specify whether the curve is gentle or tight, whether it wraps a corner, and whether the flame should follow the entire curve or only a section. For ceiling-mounted fireplaces, clarify the mounting height, the drop, the sightlines from below, and how the unit will be serviced. For custom surrounds, explain the finished material, thickness, and reveal. If the design is inspired by a letter, arch, or free-form outline, provide a dimensioned sketch and note which parts must remain visually uninterrupted.

Ask the manufacturer which shapes suit the burner technology. A ribbon fire may be linear in concept, yet custom fabrication can involve corners, returns, recessed sections, or multiple burners. Ask how joints and seams will be handled, how the flame will be distributed, and what tolerances the factory needs. If the fireplace is part of a larger feature wall, confirm who is responsible for the surround, the insert opening, and the final finishing. Clear boundaries prevent costly site adjustments. The manufacturer can also advise on special shape fireplaces and ceiling-mounted designs, but the brief must show what “special” means for this particular room.

Plan Flame Control Around Daily Use

Flame control is where a custom fireplace becomes practical. Art Fireplace’s range includes flame-controlled ethanol fires, 1-stage automatic ethanol fireplaces, 3-stage flame control ethanol fires, and 6-level flame ethanol fires. The difference is not just the number of settings; it is how the user expects to interact with the fire. A homeowner may want a simple on/off routine, while a hotel lobby or villa may need more nuanced control. Ask whether the fireplace is operated by a remote controller, a touch screen, a smartphone integrated with a smart home system, or a manual burner. Discuss who will use it, how often, and whether the controls should be concealed.

Then ask about the control sequence. How does the unit start and stop? What does each flame stage look like in practice? Can the flame be adjusted without approaching the burner? For automatic models, the remote and touch screen functions are part of the specification, so request a clear explanation of the interface and the recommended operating procedure. Safety questions belong here as well: stable combustion, fuel handling, and the relationship between flame height and the surrounding space. A manufacturer can explain its own control system, but the client should confirm that the chosen level of automation matches the day-to-day reality of the project.

Coordinate Installation and Safety Before Ordering

Installation planning should begin while the design is still flexible. Ethanol fireplaces do not require a chimney to exchange convective air, and they produce minimal smoke and pollutants compared with wood-burning fireplaces. That does not mean installation can be improvised. The manufacturer should confirm the minimum space requirements, ventilation expectations, clearances to combustible materials, and the intended mounting method. Share the room’s volume and use, especially for commercial or hospitality projects where the fireplace may run for long periods. If the manufacturer offers models designed for specific minimum floor areas, compare those recommendations with the actual room.

Ask how fuel is stored and filled, how the tank is accessed, and what routine maintenance involves. For custom shapes, request installation drawings that show the insert opening, support points, and service access. Confirm packaging and delivery dimensions early, because a long ribbon fireplace or a large custom surround may influence door widths, lift access, and site storage. It is also worth asking who provides installation guidance and whether the manufacturer can review contractor drawings before fabrication. A short list of questions helps keep the conversation focused:

  • What are the finished dimensions and the required opening size?
  • Which flame control options are available for this configuration?
  • Where are the burner, tank, and control components located?
  • What clearances and ventilation should the installer plan for?
  • How will the unit be delivered, handled, and serviced?

Finally, put the brief in writing. Include plans, elevations, material samples, control preferences, and the intended use of the space. Request a response that separates confirmed specifications from items still to be developed. This gives the design team a clear basis for budgets, construction, and approvals without relying on assumptions.

About Elodie Mercier 1309 Articles
Lyon food scientist stationed on a research vessel circling Antarctica. Elodie documents polar microbiomes, zero-waste galley hacks, and the psychology of cabin fever. She knits penguin plushies for crew morale and edits articles during ice-watch shifts.